Employers must know how to protect their workers with PPE for Covid-19.

Medical PPE for Covid-19

Protecting workers with medical PPE for COVID-19 is crucial.

This includes potential interaction with infectious people and contamination of the work environment.

Hence, carry out control of infections and strategies based on a thorough risk assessment.

Also, use safe work practices and personal protective equipment (PPE) to prevent exposures.

How to protect myself and others from COVID-19?

Hand Hygiene

Perform hand hygiene before and after all contact, contact with an infectious substance, and wearing and taking off PPE.

Also, practice regular hand washing for at least 20 seconds or with alcohol-based wipes.

Ensure that materials to perform hand hygiene are readily available to all personnel.

Medical PPE

Certainly, employers must know which PPE is suitable for their workers under the Malaysian OSH Regulations.

Moreover, workers must receive training of when to use PPE and which is necessary. Also, how to properly wear, use, dispose PPE, how to properly disinfect and maintain PPE, and the limitations of PPE.

Suggested read: Employer’s Guide to Designing an Effective PPE Program

Clean, decontaminate and maintain any reusable PPE properly.

Medical Gloves PPE for Covid-19

Put on clean, non-sterile safety gloves upon entry into the patient room or care areas. Workers must change gloves if they become torn or heavily contaminated.

Then, remove and discard gloves immediately upon leaving the patient room or care area. If this is lightly taken, the virus can spread instantly.

Medical PPE Gowns

Workers must wear a clean disposable gown upon entry into the patient room or area. If the isolation gown is somehow stained, front liners must change it immediately.

Remove and discard the medical gown straight after leaving the patient room or care area. This ensures that the virus cannot spread anywhere other than the gown itself.

Respirators PPE for Covid-19

In brief, upon entry to a care area, wear respiratory protection or a respirator at all times.  There are many respirators such as 3M 6200, 3M 6800, 3M 8210 and 3M 7502.

Furthermore, remove the respirator last of all medical PPE worn. Then, clean and disinfect reusable respirators according to the manufacturer’s instructions.

However, for disposable respirators, remove and discard after leaving the care area and closing the door.

Staff should be medically cleared and fit-tested before using respirators. They should also know the how to use, remove and dispose them properly.

Browse through our line of OSH certified respirators.

Eye Protection

Put on eye protection upon entry to the patient room or care area. Workers must remove and discard eye gear immediately when leaving the care area.

Clean and disinfect reusable eye gear such as standard safety goggles according to the instructions.

Choose the Right Medical PPE for Covid-19

To date, the COVID 19 has spread throughout the whole world to 1.32 million cases and 2.86 million deaths globally.

Therefore, to flatten the curve, front-liners must prepare themselves for the worst by donning the right type of PPE.

Suggested read: How to Choose the Right PPE

Also, ese different types of PPE together to prevent multiple routes of transmission. Because its better to be over prepared than under.

In conclusion, give careful attention to prevent contamination of clothing and skin during the process of wearing and removing PPE.

Stay strong and stay safe.

Buy Boxter Safety Shoes in bulk and get these amazing benefits!

Tested and Certified by Accredited Certification Bodies

Join Others to Become Our Next Customer

Contact Us now for Bulk Order Discount!

The post PPE for Covid-19: Protective Equipment List appeared first on Safety Shoes Brand In Malaysia - BOXTER.

Effective Personal Protective Equipment Program

A PPE program must be comprehensive.

All levels of an organization from senior management to the front-liners must all participate and commit to the implementation of a good PPE program.

Because it’s more than just a general procedure. Basically, a Personal Protective Equipment program that is fully practical includes the following:

• Risk assessment
• Appropriate controls selection
• PPE selection
• Fitting
• Training
• Management support
• Maintenance
• Program audit

Some jobs need more PPE than others.

That’s why particular attention should be paid to job requirements as some types of hazards require more than one piece of Personal Protective Equipment.

Especially those working in laboratories exposed to chemical hazards. For example, lab workers require medical PPE like anti-fog safety goggles, safety gloves, respiratory protection and chemical resistant PVC safety boots

Browse through our lab safety PPE equipment here.

The Full Guide to Design a PPE Program

Before constructing a OSHA program, the hierarchy of controls or a priority list should be written.

First of all, safety equipment is considered as the last line of defense so focus on substitution, elimination, administrative controls and engineering controls first.

Once that has been acknowledged, the employer should ensure all parties fully participate in the program, a reliable program coordinator is appointed and the PPE program is reviewed periodically.

1. Safety Awareness in PPE Program

One major factor to successfully implement an OSHA program is to raise safety awareness. This is to promote commitment to the program entirely.

So to ensure every party is aware, superiors must formulate a clear and concise company policy for all parties to follow.

2. Identifying Workplace Hazards

No matter how many safety precautions you place and practice at the workplace, hazards may still occur. Of which all must be identified and prevented accordingly.

First, revise all job operations, work practices, equipment and worksite plan. Then, apply advanced hazard analysis systems that follow Health and Safety principles. Lastly, you should review all work practices, job procedures, equipment and plant layout.

Goggles

Face Shield Visor

Helmet / Hard Hat

Earmuffs

3. Selection of PPE

Although PPE should be the last line of defense, it is the extra layer of safety every worker needs. Hence, all identified hazards must match with the suitable Personal Protective Equipment.

Moreover, to be extra safety-conscious, consult an occupational safety expert who can examine all the safety precautions and verify the PPE standards (Refer to SIRIM-QAS PPE Standards).

Also, what you can do is perform a workplace trial every so often. As for the PPE, you should always consider the ergonomic features of PPE and calculate all the costs relating to PPE usage.

4. Protective Gear Fitting

Once you’ve ticked all the boxes of which PPE is most suitable for your workers, you must ensure that the PPE fits all of them to work comfortably.

Hence, enable workers for the fitting of safety equipment and examine whether the PPE is worn properly throughout all their tasks.

5. PPE Program Training

Now that every worker has the PPE they need, they need to be trained and educated following the right safety standards.

Not only should the training apply to PPE users, PPE selectors and stock keepers should also be trained relating to the PPE. Furthermore, the training must be ongoing regularly to confirm compliance is practiced.

6. Maintenance of Safety Equipment in PPE Program

Confirm that all PPE users are familiar with the method of use, inspection and disposal of safety equipment.

In addition to that, affirm that every worker is can identify PPE defects and report to the appropriate authorities.

7. PPE Program Audit

You’re almost done with the PPE program but one thing you should be aware of is its consistent effectiveness among your workers. So, it is a good idea to revise and review the PPE program at least once a year.

Also, by analyzing the safety performance records, you can include new and improved safety rules based on those records as well. 

Steps to Create a PPE Program That Works

A PPE program is only successful if everyone involved cooperates and supports the initiative.

Once a well-structured program is designed, workers will know the right procedures relating to their safety equipment. 

So we as the leading safety equipment and safety shoes in Malaysia provides you with a selection of safety compliant PPE that helps ensure a safe working environment.

But if you have trouble selecting, refer to How to Choose the Right PPE to know your perfect match. Because we can protect you from your head to your toes!

Buy Boxter Safety Shoes in bulk and get these amazing benefits!

Tested and Certified by Accredited Certification Bodies

Join Others to Become Our Next Customer

Contact Us now for Bulk Order Discount!

The post Employer’s Guide to Designing an Effective PPE Program appeared first on Safety Shoes Brand In Malaysia - BOXTER.

Industries that involves both humans and machines, especially construction needs construction safety equipment.

Where there’s both, there’s bound to be hazards which require the right construction safety equipment.

Especially industries that involve high temperatures, heavy objects, and sharp materials.

Thus, both employers and employees have a responsibility to follow strict safety protocols to ensure a healthy work culture. 

Read: Malaysian OSH Regulations 

So here is a list of the top most essential safety equipment for construction workers.

Top 8 Essential Construction Safety Equipment in Malaysia

1. Construction Eye Protection

Even a small piece of dust can irritate an eye, let alone debris and sparks. 

Eye injuries happen due to foreign particles that enter the eyes whilst welding, cutting, nailing, grinding, handling concrete, and the like. 

However, it’s important to know what type of hazards your site has.

Hence, refer to the table below to help you differentiate between every type of eye gear. 

Browse through our safety goggles here.

2. Construction Face Protection

Some sites experience extreme winds, smoke, sparks, or hazardous materials. If in contact with the face, your well-being will be compromised.

Therefore, face protection is crucial for workers if welding is involved. This is because burns and lesions can greatly injure especially when the course of action is prolonged.

So, prevent such incidents by wearing appropriate face safety equipment in construction site.

For example, a Handheld Welding Face Shield and an Adjustable Welding Head Shield. 

3. Construction Safety Helmet

Even if you’re only visiting a construction site, wearing a hard hat is a MUST. 

This fundamental PPE in the construction safety equipment list protects anyone from falling objects and harmful materials where construction areas are most abundant.

Hence, make sure you wear SIRIM certified hard hats for ultimate quality and safety. 

4. Construction Auditory/Hearing Safety

Everyone knows how loud and noisy construction can be. But that’s at a distance. Actually, construction workers are exposed to 5 times that volume!

In addition, not wearing earplugs or earmuffs to minimize surrounding noise can severely damage the eardrums which may impair hearing.

5. Construction Hand Gloves

Working in construction requires active hand functions. Since hazards are almost everywhere, safety gloves are construction site safety equipment that must be worn at all times. 

For this reason, provide your workers with well-suited hand gloves that fit their tasks. 

Such as a Welding Glove, PVC Dipped Glove or a Furniture Leather Glove.

After all, it only takes a little research to know which safety gear for construction is best.

Read: Tips to Choose the Right PPE

6. Construction Fall Arrest System

Apparently, falling from heights has the highest record of cases among other construction injuries.

So even if you feel completely safe on a barred threshold, it wouldn’t hurt to wear an industry standard Safety Harness or Safety Lanyard for extra safety.

Not what you’re looking for? If not, browse through our Fall Protection category for more fall arresters, accessories, and safety equipment in construction site.

7. Construction Safety Shoes

Every work site requires a good pair of safety boots.

Have you ever experienced slips, trips, and falls? Does your feet hurt when you bump into something? You need to change your work boots!

So, wear safety shoes that have puncture-resistant quality, steel toe caps, and made of durable material. Moreover, they are perfect for construction workers.

Read: 6 Ways Safety Shoes Protect Workers

8. Construction Visual Aids

Some construction sites require working at night due to whatever circumstances. This means that all of the above protective gear for construction workers means nothing if you can’t be seen.

So velcro-strap on a Reflective Safety Vest so you’re not invisible to other workers.

Regardless if you’re 100% careful, being seen is of vital importance when on the job. 

Construction Safety Equipment

In the end, you may think technology is much more advanced these days to reduce some of the construction risks, but it’s better to be completely safe than sorry.

Hence, that’s why we know all the risks industrial work has, and that’s why we have chosen only the best danger-ready PPE that helps ensure a safer workplace.

So, get in touch with our customer supporters who can help you pick out the perfect construction safety equipment for you and your workers. No charge!

Buy Boxter Safety Shoes in bulk and get these amazing benefits!

Tested and Certified by Accredited Certification Bodies

Join Others to Become Our Next Customer

Contact Us now for Bulk Order Discount!

The post Top 8 Essential Construction Safety Equipment appeared first on Safety Shoes Brand In Malaysia - BOXTER.

To prevent hazards, your workers need a safe and healthy working environment with DOSH SIRIM Certified Safety Boots and PPE.

Generally, Personal Protective Equipment (PPE) is the armor industrial workers wear that prevent hazards.

So, workers must prepare themselves with the right PPE before handling a task, for example wearing the right safety boots, safety goggles etc.

Because it’s not just important to wear PPE, maintenance and instructions must be religiously followed as an added guarantee.

Refer: Malaysian OSH Regulations

How to Prevent Hazards with Safety Boots and PPE

So you’ve been in the industry for a long time, you must know all the risks it poses. If you know the risks, you also know how to prevent such hazards.

But how well do these protective gear actually keep workers safe?

List of Protective Gear that Prevent Hazards

Safety Boots Prevent Hazards

In any worksite, one staple workwear are safety boots.

This is because fatalities, disabilities and lost wages can be a pain to ‘cure’.

However, feet injury is easily prevented by following the set safety boots standards of protective work boots.

Suggested Read: 6 Ways Safety Boots Protect Workers

Anti fog Safety Goggles for Eye Protection

Certainly, eyes are the most fragile and sensitive body part. Even the slightest dust can damage the eye.

Industrial workers are often in the presence of heavy debris and fragments which could compromise the eyes. Wearing a good pair of safety goggles can help prevent that entirely.

Besides, anti fog safety goggles can protect your eye from liquid splashes and solid impacts.

Check through our anti-fog safety goggles here.

Helmet for Head Protection

A helmet or hard hat are PPE that protects the head from major injuries caused by falling objects or falls. With so many types of helmets, there’s no way you can say there’s none fit for the job.

Nowadays you can select from so many options including features like an adjustable interior harness and comfortable sweatbands.

Browse through our hard hats here.

Earplugs Prevent Hazards of Hearing

Do you work in an environment with high sound levels? In that case it is very important to consider hearing protection as your PPE.

Earplugs are designed to be comfortable, but earmuffs offer more convenience as you can quickly put these on or take them off.

Respirators to Prevent Hazards

Employees regularly inhale vapors, smoke, powder or dust while performing their job.

Wearing the right dust masks offer protection against fine dust and other dangerous particles that could harm the worker’s respiratory system.

A full-face mask is used if the materials are truly toxic as they adhere tightly to the face.

If there are hazardous vapors or infectious agents, invest in respirators that can clean the particles as you inhale.

Safety Gloves for Hand Protection

Working in an industrial setting requires practical and hands-on work.

Hands and fingers are on the front lines so it is vital to protect them properly with PPE. There is not a safety glove fit for all.

You can either choose a Welding Glove fit to withstand heat, PVC Dipped Glove for that extra friction or a Furniture Leather Glove for maximized durability.

Reflective Vest to Prevent Hazards

Preventing accidents with PPE is crucial in a hazardous environment such as construction and welding sites.

That is why good visibility at work is a MUST. A highly reflective vest improves self-visibility in low visibility environments for personal safety.

Being well-seen is important when on the job no matter how careful a worker can be.

How can we prevent safety hazards?

Danger is at every corner. We know that better than anyone.

We as the leading and DOSH SIRIM Certified safety shoes supplier and manufacturer in Malaysia provides a selection of product compliant PPE that helps ensure a safe working environment.

If you have trouble selecting, refer to How to Choose the Right PPE to know your perfect match. We can protect you from your head to your toes!

Buy Boxter Safety Shoes in bulk and get these amazing benefits!

Tested and Certified by Accredited Certification Bodies

Join Others to Become Our Next Customer

Contact Us now for Bulk Order Discount!

The post How to Prevent Hazards with Safety Boots and PPE appeared first on Safety Shoes Brand In Malaysia - BOXTER.