Employers must always ensure their worker’s put their best foot forward.
The Malaysian OSH regulations require all employers to provide DOSH SIRIM certified safety shoes.
Failure to do so may lead to legal issues that can detriment your company.
So here are the features of DOSH SIRIM safety shoes that best suit your workers on a daily basis.
What are the DOSH Safety Shoe Requirements?
The Department of Safety and Health (DOSH) states that safety boots must withstand several hazards.
The Standard and Industrial Research Institute of Malaysia (SIRIM) Berhad, they are responsible to certify DOSH-approved shoes.
DOSH SIRIM Steel Toe Boots for Impact Resistance
A common cause of injury especially in heavy industries is heavy impact.
Hence, provide workers in such conditions with safety shoes with a protective steel toe cap.
Compression Resistance
Some working conditions crush the feet due to heavy objects rolling.
So without a steel toe cap that can withstand pressure, you can say goodbye to your toes and your job.
Flexing Resistance of Safety Shoes
It is important that the material of the safety shoe is of good quality leather or fabric.
That’s why the material should be able to flex without tear within long periods of time under exposure.
DOSH SIRIM Safety Boots with Abrasion Resistance
Another feature of the safety shoe material is its resistance to abrasion. Because workers are more secure wearing shoes that won’t rupture easily.
Hence, DOSH approved safety shoes have high abrasion resistance to prevent material or volume loss.
Thermal Insulation of Work Boots
Worksites such as welding, construction and machine operations are prone to high temperatures.
Therefore, without a pair of good insulators of heat safety boots, the heat will compromise workers’ feet.
DOSH SIRIM Safety Shoes with Corrosion Resistance
In some instances, workers are exposed to acids, alkalies, salts and corrosive gases.
Thus, prep these workers with corrosion resistance safety shoes to withstand such chemicals.
Penetration Resistance of DOSH SIRIM Safety Boots
When buying workers’ safety footwear, consider heavy duty soles and a thick exterior for better feet protection.
Polyurethane (PU) profiled outsoles are the best type to prevent traction and absorb impact.
DOSH SIRIM ESD Shoes
Electric shocks can severely harm your workers. So, wear electrical resistance shoes since the feet area is one of the most exposed to electricity.
However, if there is a risk of electrical accidents, opt for cow leather shoes which are non-conductive.
Shock Absorption of Work Shoes
Cow leather shoes are non-conductive. This helps in mitigating the shock caused by excessive kinetic energy from the feet.
Moreover, energy absorbing shoes can safely contain the kinetic energy absorbed through the feet. This prevents it from spreading throughout the body.
Watertight Shoes
Any pair of good quality shoes should be leakproof. Especially for industrial workers who depend on their safety shoes for their efficiency.
That’s why DOSH-SIRIM inspects materials supporting the safety shoe so that they do not leak as much.
Safety Boots with Oil Resistance
Oils can seep into poor quality shoes and harm workers’ feet.
For such workers, employers must prepare oil-resistant safety shoes for comfortable work.
Choose wisely, Choose DOSH SIRIM certified.
Prioritizing workers’ well being and general health is a top responsibility of employers.
Take note on the different aspects of the worksite to fit with the choice of safety shoes. It is quite easy since there is a wide variety of them in the market.
So, once you’ve done the hazard assessment, contact a DOSH-SIRIM certified safety shoe manufacturer to order in bulk.
Search no further than Boxter!
Buy Boxter Safety Shoes in bulk and get these amazing benefits!
Tested and Certified by Accredited Certification Bodies
