ESD safety boots have become critical for industrial and manufacturing workers.

So, it is important to know how to take care of your ESD shoes for them to last and perform efficiently.

How to Properly Take Care of ESD Safety Boots

ESD safety boots or anti static shoes are useful for preventing static damage to electronic devices that can also lead to fires and explosions.

Basically, they help your workers work safely under electrostatic environments.

However, the quality of your ESD protection shoes depends on how well your workers take care of them.

So, in order to prolong ESD safety shoe service life, we would like to share with you some simple but helpful tips you can share with your workers.

Do not use any cleaning agent

To begin with, do not use any cleaning agent on your ESD safety boots.

To clean them, simply wipe them down with a damp cloth.

If you have some dirt stuck in the crevices of your soles and heels, you can use a suede brush to remove it.

Never use any cleaning agents because they can damage the material of your ESD work shoes and make them ineffective at protecting you from static electricity.

Never leave your ESD safety boots in a damp area

Never leave your ESD safety boots in a damp area for long periods.

The moisture causes the leather to become worn out and eventually crack.

This will eventually damage the leather.

It will also lead to uncomfortable and smelly feet.

When you get home, always store your shoes in a well-ventilated place where they can dry naturally.

Store in cool, dry place

If you are not using them for a long time, store your ESD boots in a cool and dry place, preferably in their original box.

This will not only keeps your ESD safety shoes in good shape but also protects them from unnecessary elements.

Follow these precautions:

• Keep away from moisture and heat.
• Avoid direct sunlight.
• Protect from dust.
• Keep away from chemicals and other pollutants.

Dry immediately once in contact with water

If it rains or if you happen to step in the water while wearing your ESD footwear, make sure that you immediately take off the shoes and allow them to dry.

This is because water can damage the inner lining of the shoe.

Moreover, when a pair of ESD safety boots get wet inside, they will take some time to dry out completely and become comfortable again.

Thus, it’s best to wait until they are completely dry before wearing them again.

This is to avoid causing any further damage to the shoes and yourself!

Upgrade to ESD Safety Boots for Your Workers!

ESD safety boots are an absolute must when performing work safely, but only if your workers take good care of them.

By purchasing quality ESD safety shoes, you can minimize the damage done by static discharge and protect your workers!

So, invest in these vital safety shoes for your workers.

Contact us for more information on our ESD approved safety footwear.

Related: The Importance Of ESD Safety Shoes For Oil And Gas Workers

Do not hesitate to contact us for bulk orders or individual orders. We are more than happy to assist you.

Buy Boxter Safety Shoes in bulk and get these amazing benefits!

Tested and Certified by Accredited Certification Bodies

Join Others to Become Our Next Customer

Contact Us now for Bulk Order Discount!

The post Ways To Take Care Of Your ESD Safety Boots (100% Helpful!) appeared first on Safety Shoes Brand In Malaysia - BOXTER.

ESD safety shoes come with a lot of benefits for people who work in the oil and gas industry.

The safety of your workers is a critical issue for oil and gas companies.

Since the risk of static electricity is high in the oil and gas industry, providing electrical protection for your workers is crucial.

This includes providing special ESD safety footwear that will protect your workers from electrical hazards.

What are ESD Safety Shoes?

ESD safety shoes are designed to protect workers from electrostatic discharge (ESD). 

You may also know them as anti static safety shoes or static dissipative footwear.

They protect against the build-up of static electricity, which can cause damage to sensitive electronic equipment and lead to fires and explosions.

Hence, ESD shoes are made of conductive materials such as PVC or PU for the soles to reduce the build-up. 

Why Do Oil and Gas workers Need Anti Static Work Shoes?

Oil and gas workers often work in environments where they are exposed to a range of potential hazards, including static electricity.

Static electricity occurs when non-conducting materials such as a shoe sole and floor surface touch one another.

It can be extremely dangerous, especially if your workers do not have the right safety shoes.

You can minimize static electricity using conductive materials. 

This includes wearing ESD safety shoes that conduct static electricity from the body into the ground.

So, if your workers work in an area with high levels of static electricity, you must provide them with a pair of ESD boots.

Best ESD Safety Shoes for Your Workers

There are a lot of ESD safety shoes available on the market today.

However, that does not mean all ESD footwear has the same level of protection.

Some anti static shoes may not provide enough conductivity, which can be harmful and wasteful.

So, as a responsible employer, you must find only the best ESD shoes for all your employees.

But, don’t worry, because Boxter has got you covered!

You will never have to worry about finding the best ESD safety shoes when you can just buy safety shoes at Boxter.

Check out Boxter Voltech ESD safety shoes below for ESD protection:

Roger Safety Shoes

Features:

• anti-static
• oil-resistant/oil-proof
• chemical resistant/chemical proof
• shock absorption
• anti-penetration
• CE certified

More details: https://boxterfootwear.com.my/product/rogers-lightweight-safety-shoes/

Hulk Safety Shoes

Features:

• anti-static
• oil-resistant/oil-proof
• chemical resistant/chemical proof
• shock absorption
• anti-penetration
• CE certified

More details: https://boxterfootwear.com.my/product/hulk-lightweight-safety-shoes/

ESD Approved Safety Footwear from Boxter

All in all, it is absolutely imperative that anybody working in the oil or gas industry wear ESD safe boots at all times.

They protect your most valuable asset, which is your employees.

Hence, there is no reason not to invest in these vital safety shoes for your workers.

Contact us for more information on our ESD approved safety footwear.

Suggested read: 5 Reasons To Choose Steel Toe Boots For Your Workers

Do not hesitate to contact us for bulk orders or individual orders. We are more than happy to assist you.

Buy Boxter Safety Shoes in bulk and get these amazing benefits!

Tested and Certified by Accredited Certification Bodies

Join Others to Become Our Next Customer

Contact Us now for Bulk Order Discount!

The post The Importance Of ESD Safety Shoes For Oil And Gas Workers appeared first on Safety Shoes Brand In Malaysia - BOXTER.

The proper safety shoes for your occupation can guarantee your safety and comfort at work.

Safety footwear comes in many variations and types. They have different levels of protection and features. That being said, not all work environments are the same. Therefore, the protection needed varies according to the industry.

Guide to Selecting Proper Safety Shoes for Your Occupation

Many industries require workers to wear safety footwear. Those industries include construction, agriculture, chemical, healthcare, manufacturing, logistics, oil and gas, and food and beverage.

These workplaces are too risky for regular shoes. Therefore, safety shoes are required to protect the workers from injuries.

However, wearing just any safety shoes are not enough as different work environments need different type of protection.

Hence, here is a guide to selecting the proper safety shoes for your occupation.

What are the common injuries at the workplace?

Foot injuries at the workplace are more common than you thought. There are 2 main types of workplace foot injuries:

1. Slips & Falls
2. Trauma (punctures, crashing, electrocution etc.)

Although it is impossible to 100% prevent these injuries from happening, you can minimize the risk by wearing the proper safety shoes for your occupation.

Accessing workplace risks

The next thing you should do is to assess the health and safety risks at your workplace before buying yourself a pair of safety shoes.

Some of potential workplace hazards:

1. Electric shock
2. Sharp objects
3. Falling objects
4. Electrostatic discharge
5. Exposure to water
6. Extreme temperature
7. Corrosive liquid

Suggested read: Safety Shoes 101: How do you perform a hazard assessment?

Recognize some of the risks? Worry not, we have a few suggestions of safety shoes that can protect your feet from these hazards.

Non Slip Safety Shoes

Wet and oily surface can lead to slip and fall. Therefore, anti slip safety shoes is necessary to prevent these accidents from happening at the workplace.

Heat Resistant Safety Shoes

If you are exposed to extreme temperature during your job, these heat resistant work shoes are ideal for you.

ESD Safety Shoes

Working in electrical environment? Our ESD safety shoes can protect you from electrostatic discharge.

Selecting the correct safety footwear by industry

As well as considering the hazards at the workplace, you can also select the correct safety shoes by industry. You may refer to the table below for guide:

Next read: 3 Types of Safety Shoe Toe Caps For The Best Protection

Top Safety Shoes Manufacturer in Malaysia

Boxter is the top safety shoes manufacturer in Malaysia. We supply safety shoes to all industries in Malaysia.

Boxter safety shoes can give you maximum protection and comfort for all kinds of occupations. We can guarantee that our shoes can fit your every need.

So, browse our vast collection of safety shoes here and contact our friendly customer service for assistance.

Buy Boxter Safety Shoes in bulk and get these amazing benefits!

Tested and Certified by Accredited Certification Bodies

Join Others to Become Our Next Customer

Contact Us now for Bulk Order Discount!

The post Guide to Selecting the Proper Safety Shoes for Your Occupation appeared first on Safety Shoes Brand In Malaysia - BOXTER.

Kasut keselamatan merupakan PPE yang penting untuk pekerja

Sebagai salah satu pembekal kasut keselamatan teratas di Malaysia, keselamatan pelanggan adalah prioriti kami yang dibukti semasa proses pembuatan kasut safety kami.

Kerana itu, bahan but kerja kami diimport dari seluruh dunia untuk memastikan bahawa hanya yang terbaik sahaja dalam reka bentuk setiap but kerja.

Secara keseluruhan, kami memahami betapa pentingnya but keselamatan yang selesa bukan sahaja untuk mencegah kecederaan tetapi juga untuk meningkatkan prestasi kerja.

Oleh itu, kami telah menyenaraikan beberapa kasut keselamatan terlaris tahun ini yang disukai oleh pelanggan setia kami untuk membantu anda membuat pilihan terbaik.

Kasut Safety Boot Terbaik di Malaysia

Sejak kami berada dalam industri ini, kami tahu pilihan peralatan pelindung diri (PPE)  mempunyai kesan yang ketara terhadap risiko kecederaan di tempat kerja.

Setiap pekerja mempunyai hak untuk keselamatan. Terutamanya ketika bekerja di kawasan yang merbahaya di setiap sudut.

Rujuk: Akta Keselamatan dan Kesihatan Pekerjaan 1994

Memilih kasut untuk pekerja anda merupakan proses yang sukar tapi tak semestinya.

Lengkap dengan pensijilan DOSH SIRIM dan prestasi safety boots yang memenangi anugerah, Boxter mempunyai but safety terbaik yang sesuai untuk sebarang keadaan.

Info cadangan: Guidelines for Safety Shoes DOSH Approval in Malaysia

Kasut Keselamatan Lightweight

Boxter adalah supplier kasut keselamatan ringan yang terkenal di Malaysia. Lain dari yang lain, Boxter menggabungkan teknologi mendalam dengan reka bentuk praktikal untuk keselesaan dan keselamatan tertinggi.

Kasut safety lightweight cukup kuat untuk perlindungan kaki namun cukup ringan untuk menyokong pergerakan semula jadi pemakai. Safety shoes yang berat mungkin kelihatan lebih kuat dan kukuh tapi sebenarnya, ia akan menyebabkan tekanan pada kaki.

Jangan risau tentang pentutup jari keluli (steel toe cap), Boxter telah menginovasikan penutup jari kaki komposit yang lebih ringan dan nipis tanpa mengganggu keselamatan dan keselesaan.

Kasut Safety Anti Slip

Kejadian tergelincir dan jatuh boleh berlaku tanpa amaran, terutamanya di persekitaran yang licin dan berminyak. Oleh itu, kasut anti gelincir diperlukan untuk mengelakkan kemalangan ini berlaku di tempat kerja.

Kasut safety anti slip Boxter direka khusus untuk berfungsi dengan baik di tanah basah dan berminyak. Ianya mematuhi CE EN ISO 20345: 2011, jadi pekerja boleh memakai protective footwear kami dengan selamat.

Tambahan lagi, kasut anti slip yang selesa ini dibuat dengan out-sole getah yang tahan gelincir dengan cengkaman yang kuat di permukaan berair dan berminyak.

Maka, ianya sesuai untuk kebanyakan kawasan kerja termasuk restoran, hospital, penjagaan kesihatan, runcit, hiburan dan perindustrian.

Kasut Keselamatan Tahan Panas

Pekerja yang terdedah kepada suhu tinggi memerlukan but keselamatan yang mampu menahan panas yang melampau. Tanpanya , material kasut dan kaki pemakai akan terbakar dengan teruk.

Oleh itu, Boxter telah menghasilkan pelbagai kasut keselamatan tahan api untuk mengelakkan kecederaan tersebut. Sebaik sahaja anda memakai safety shoes Boxter, bekerja di kilang keluli, pelebur tembaga, atau persekitaran suhu tinggi akan menjadi mudah.

Kasut Safety Perempuan

Para wanita juga memerlukan sepasang kasut safety boot perempuan tersendiri. Direka khas untuk keselesaan, keselamatan dan gaya, but kerja wanita sesuai untuk mereka yang mencari PPE yang kuat namun feminin.

Kasut keselamatan untuk wanita ini tersedia untuk wanita yang bekerja dalam bidang pembinaan dan kejuruteraan (kasut kerja kaki keluli) dan hospital dan makmal (kasut non slip).

Jadi, ketahanan tapak dan lapisan mesh yang selesa adalah beberapa ciri tambahannya untuk mengelakkan keletihan kaki.

Akhir sekali, Boxter telah menghasilkan kasut but safety esd yang selamat untuk persekitaran elektrik dan mudah berubah.

Info lanjut: The Best Women Safety Shoes Brand in Malaysia

Kasut Keselamatan ESD untuk Pekerja

Kasut ESD sangat diperlukan di persekitaran elektrik atau tidak menentu. Ini adalah untuk memastikan keselamatan dan kesejahteraan pekerja.

Itulah sebabnya kasut safety Boxter ESD diperbuat daripada bahan berkualiti tinggi untuk memberikan perlindungan bahaya elektrik. Ianya juga dapat memberikan perlindungan terhadap cas elektrostatik yang dihasilkan oleh geseran pada tubuh pemakai.

Lebih-lebih lagi, ciri ini sangat penting dalam situasi yang melibatkan bahan letupan, bahan kimia, gas, letupan habuk, atau jika anda bekerja dengan elektronik sensitif.

Oleh itu, kasut safety boot ESD mengurangkan risiko pencucuhan bahan kimia mudah terbakar, bahan berbahaya, dan bahan letupan.

Bacaan lain: The Leading DOSH SIRIM Safety Boots Supplier in Malaysia

Kasut Safety Boot Terbaik di Malaysia

Pekerja anda berhak mendapat sepasang kasut kerja terbaik yang dapat meningkatkan produktiviti dan keselamatan mereka

Mereka bergantung pada majikan mereka untuk menyediakan kasut safety yang selesa untuk sebarang tugas.

Tapi mana nak cari kedai kasut safety boots terbaik di Malaysia? Sama ada secara pukal atau hanya sedikit, pasukan jualan kami boleh membantu anda membuat keputusan.

Akhir kata, kami adalah pembekal kasut borong terkemuka yang dapat memberi anda pilihan kasut borong bergaya yang sesuai untuk pekerja anda.

Dipercayai oleh Syarikat, Disayangi oleh Pekerja

Nippon Paint, MASkargo, Perodua, Honda, BMW, Sime Darby, Petronas, Top Glove dan banyak lagi.

[logoshowcase cat_id="295" dots="false" slides_column="5"]

Diuji dan Diperakui oleh Badan Pensijilan Bertauliah

[logoshowcase cat_id="492" dots="false" slides_column="5"]

Sertai Mereka untuk Menjadi Pelanggan Kami Seterusnya

Hubungi Kami Sekarang!

The post Kasut Keselamatan Terbaik di Malaysia appeared first on Safety Shoes Brand In Malaysia - BOXTER.

Not conducting a hazard assessment can cause serious problems for workers and your business. 

Especially workers who spend a lot of time on their feet. This includes construction, manufacturing, agriculture and other workers.

Generally, these workers face several problems such as sprains, injuries from sharp objects, crushed feet and slips, trips and falls.

Thus, it is important that employers conduct a hazard assessment of all the potential risks at the workplace to protect workers.

Is a hazard assessment for footwear important?

Yes. As stipulated by the Malaysian OSH regulations, worker’s safety and health should be the employer’s responsibility. 

In any worksite, one staple workwear are safety boots. However, a hazard assessment is necessary to pinpoint all the risks first.

Crush injury of the foot

Does your worksite have heavy materials and equipment? They are a hazard that can cause crushed feet.

Although you can warn workers to be more cautious around the area, one definite solution is to gear workers with steel toe boots.

Once workers wear steel toe safety shoes, they can work comfortably and safely throughout the day.

Sharp injuries and punctures 

At any worksite, there is a possibility of misplaced or scattered sharp objects such as nails, screws or sharp sided material.

Hence, before long, workers might face injuries and wounds that can compromise their work.

Even if workers conduct frequent housekeeping, there can still be a possibility of feet injury.

So, for full safety, workers must wear puncture-resistant safety boots that have heavy duty soles and a thick exterior. 

Hazard assessment of electrical hazards at the workplace

Electric shocks or static are a common workplace hazard (hazard di tempat kerja), particularly with machinery and industrial tools.

Therefore, employers must identify which areas have these hazards. Then, equip the staff working in these areas with electrical hazard safety shoes.

To resolve this, buy ESD safety shoes made from genuine cow leather material that is non-conductive to offer better feet protection. 

Causes of slips, trips and falls

Slips, trips and falls commonly happen due to slippery surfaces, smooth flooring and spilled liquid.

These accidents may not be as fatal as other hazards, but it is the most common. Hence, a hazard assessment is crucial to identify where these accidents can happen.

Afterward, employers must prep workers at these accident-prone areas with anti-slip or slip-resistant safety shoes.

Workplace burn injuries hazard assessment

Excessive heat can occur from electrical equipment, chemicals or combustion depending on the industry.

With that said, severe burns can seriously injure workers or worse, cause fatality. So, conduct a hazard assessment to determine which areas have these risks.

Once an assessment is done, place safety precautions so workers are more aware in these areas.

Moreover, employers must provide workers in these risky areas with heat resistant shoes that can withstand temperatures and corrosive chemicals.

Suggested read: Indestructible Features of Boxter Safety Shoes

Conduct a hazard assessment for full protection

Keep workers and your business safe with a hazard assessment.

Once you’ve identified each hazard with a safety footwear risk assessment, gear each worker with the right safety hazard (hazard keselematan) shoes.

This will ensure that your workers are not only safe but work more productively as well.

Nonetheless, you should conduct shoes inspection checklist before buying the best safety shoes from a top grade safety shoes supplier.

Boxter has a full range of high performance safety shoes that fulfils your safety shoes inspection checklist.

Buy Boxter Safety Shoes in bulk and get these amazing benefits!

Tested and Certified by Accredited Certification Bodies

Join Others to Become Our Next Customer

Contact Us now for Bulk Order Discount!

The post Safety Shoes 101: How do you perform a hazard assessment? appeared first on Safety Shoes Brand In Malaysia - BOXTER.

Top Lightweight Safety Shoes in Malaysia

The best lightweight safety shoes for heavyweight work

As the leading lightweight safety shoes supplier in Malaysia, we aspire to make only the most comfortable lightweight work boots for any type of work. 

That’s why we are constantly upgrading our safety shoes technology so you can experience light and comfortable safety shoes.

Above all, we at Boxter Footwear know those working in heavy industries need a pair of lightweight industrial safety shoes (kasut keselamatan). This helps to combat injuries and increase productivity.

Thus, we take pride in manufacturing the lightest safety shoes most likely in the world. With that said, we’ve compiled all of our best-selling comfortable lightweight work boots (but kerja) for your next heavy work.

What are the most comfortable safety shoes?

When working in such dangerous surroundings, workers need to be fully focused. So, they need comfortable lightweight safety boots (but keselamatan) to avoid discomfort during work.

Thus, to be extra safe without compromising comfort, you must wear DOSH SIRIM certified work shoes. They are vetted for ultimate safety and comfort so work is never risked.

For more information of DOSH SIRIM safety shoes approval, refer Malaysian OSH Regulations.

Therefore, consider choosing from the list of DOSH SIRIM safety shoes below for the best lightweight safety boots.

Suggested read: Foot Injuries and How Safety Shoes Prevent Them

List of Lightweight Work Shoes in 2020

1. Best Lightweight Steel Toe Boots

Are you looking for steel toe safety shoes manufacturers? Not only that, we make the best lightweight steel toe shoes with a lighter and thinner steel toe cap. 

So throw away your steel toe cover overshoe and purchase Boxter’s steel toe boots that can withstand pressure up to 200 Joules. 

Thus, we recommend choosing this lightweight steel toe cap trainers for your daily industrial work.

2. Lightweight Slip On Work Boots

Boxter anti slip shoes work best on wet and oily ground, preventing any slips, trips and falls. Moreover, these slip resistant shoes are certified CE EN ISO 20345:2011 so workers can wear them with full confidence.  

Besides that, these comfortable non slip shoes have slip resistant rubber out-soles that has a superior grip even on the most slippery floors. Therefore, they are the ideal lightweight safety footwear for a fast-paced working environment. 

Suggested read: Indestructible Features of Boxter Safety Shoes

3. Best Lightweight ESD Safety Shoes

If your worksite has a risk of electric or static hazards, workers need a quality pair of lightweight ESD safety shoes. Not only powerful against harmful electric shocks, they are lightweight work boots so workers can work confidently. 

Thus, consider buying Boxter ESD safety boots that provides electrical hazard protection. Also, they can also protect you from any electrostatic charge present at the worksite.  

4. Best Lightweight Safety Shoes for Women

Boxter also specializes in producing the lightest safety shoes for girls. These light safety shoes for women are designed with style and comfort yet perfect for rough work as well. 

Apart from its suitable sizes for women, Boxter’s comfortable ladies work boots are engineered with steel toe caps, slip resistance and ESD-safe features. So these safety girl shoes can stand strong even in the most dangerous environments. 

Top Performance Light Safety Shoes in Malaysia

 Your need only the best light safety shoes for the best work experience.

Generally, lightweight safety boots are super strong yet super lightweight for smooth and natural movements. Although heavy safety shoes look more robust, they will actually cause foot injury due to its strong pressure.

Unlike most, Boxter is a lightweight safety shoes supplier in Malaysia that tailors the best lightweight works shoes with ultimate comfort and safety.

So look no further than Boxter wholesale shoes suppliers for your super lightweight safety boots. 

Buy Boxter Safety Shoes in bulk and get these amazing benefits!

Tested and Certified by Accredited Certification Bodies

Join Others to Become Our Next Customer

Contact Us now for Bulk Order Discount!

The post The Most Lightweight Safety Shoes in 2020 appeared first on Safety Shoes Brand In Malaysia - BOXTER.

Leading Safety Boots Supplier in Malaysia : Boxter Footwear

Thank you for making our safety shoes No. 1!

Being one of the top safety boots suppliers in Malaysia, we place customers’ safety at the center of everything we do through our safety shoes.

That is why our safety boots materials are sourced from all over the world to ensure that only the very best goes into each and every work boot.

All in all, we understand the importance of comfortable safety shoes (kasut keselamatan) not only to prevent injuries but also improve work performance.

Hence, we’ve listed some of our top-selling safety boots (but keselamatan) of the year our loyal customers love so you know which pair you should choose.

The Best Safety Shoes for Workers

We are the best safety shoes brand in Malaysia so we know the types of risks in the workplace.

Every employee has the right to safety. Especially when it comes to jobs where hazards are at every corner.

Refer: Malaysian OSH Regulations.

But, deciding which pair of safety boots for your workers is stressful. But it doesn’t have to be.

We at Boxter knows exactly what your feet needs. Complete with DOSH SIRIM certification and award-winning safety shoe performance. Take a look at our best-selling safety boots fit for any occasion.

Suggested read: How to Choose the Right PPE

Best Lightweight Safety Shoes

Boxter is a renowned lightweight safety shoes supplier in Malaysia. Unlike others, Boxter has combined profound technologies with functional design for the ultimate comfort and safety.

Lightweight safety boots are strong enough for feet protection yet lightweight enough to support natural movements of the wearer. Heavy shoes may seem sturdier and robust but actually, it will cause excessive pressure harming the feet. 

Don’t worry about the steel toe cap, Boxter has innovated a lighter and thinner  composite toe yet safety and comfort is not compromised at all. 

Top Anti Slip Safety Shoes

Slip and fall accidents can happen without warning, especially in slippery and greasy environments suitable for those looking for restaurant work shoes. Therefore, slip resistant shoes are necessary to prevent these accidents from happening in the workplace. 

Thus, Boxter anti slip shoes are designed specifically to work best on wet and oily ground. They comply with the CE EN ISO 20345:2011, so workers can safely wear our safety footwear with confidence. 

These comfortable non slip shoes are made with slip resistant rubber out-soles with a superior grip when exposed to watery and oily surfaces. Needless to say, they are ideal for most work areas including, restaurant, hospitality, healthcare, grocery, travel, entertainment and industrial. 

Heat Resistant Safety Boots

Workers exposed to high temperatures require a pair of safety footwear that can withstand extreme heat. Without it, the material will catch fire and severely burn feet.

Therefore, Boxter has designed a line of fire-proof safety boots to avoid such injury. Once you wear proper footwear, working at a steel mill, copper smelter, furnace or any high-temperature environment will be a breeze.

Comfortable Ladies Work Boots

Even ladies need their own special pair of safety girl shoes. Specially designed for comfort, safety, and style, they are perfect for those looking for a tough yet feminine PPE. 

These work shoes for ladies are available for women working in construction and engineering (womens steel toe work boots) and hospitals and laboratories (white non slip shoes). So, slip resistance and comfortable mesh lining are some of its added features to prevent foot fatigue. 

Last but not least, Boxter has made its best safety shoes for women electrostatic discharge (ESD) safe for electric and volatile environments. 

Best ESD Safety Shoes

ESD shoes are much needed for workers in electric or volatile environments. This is to ensure the worker’s safety and well-being.

That is why Boxter ESD safety boots are made of high-quality materials to provide electrical hazard protection. They can also offer protection against electrostatic charges generated by friction against the human body.

Moreover, this feature is extremely vital in situations involving explosives, chemicals, gas, dust explosion, or if you work with sensitive electronics.

As such, the ESD shoes greatly reduce the risk of ignition of flammable chemicals, hazardous substances, and explosives.

Suggested read: How to Check the Quality of Safety Shoes before Purchasing

Top Performance Safety Shoes Malaysia

 Your workers deserve the best pair of work boots that can improve productivity and safety

They rely on their employer to provide the best lightweight work boots for any task. No work can be done effectively with an uncomfortable pair of work shoes.

Stuck deciding which pair to get your workers? Be it in bulk or just a few, our attentive sales team can help you decide. 

Get in touch with our attentive sales team for the best option for wholesale shoes suppliers, Boxter can provide you with a selection of trendy wholesale shoes perfect for your workers.

Buy Boxter Safety Shoes in bulk and get these amazing benefits!

Tested and Certified by Accredited Certification Bodies

Join Others to Become Our Next Customer

Contact Us now for Bulk Order Discount!

The post What are the Best Safety Shoes in Malaysia? (2026 edition) appeared first on Safety Shoes Brand In Malaysia - BOXTER.

How DOSH SIRIM Certified Safety Shoes Protect Workers

Employers are responsible to provide and insist their workers to wear safety shoes on the job.

There is no question why personal protective equipment (PPE) is so important, especially safety shoes.

The Malaysian OSH regulations has a strict ruling on work safety.

In any worksite, one staple workwear are safety boots.

Prevention is better than cure. Fatalities, disabilities and lost wages can be a pain to ‘cure’.

Feet injury is easily prevented by following the set safety boots standards of protective work boots.

Here’s a list of how DOSH SIRIM Certified safety footwear protect workers on the job.

Steel toe safety shoes to prevent crushed feet

Imagine for a second. Going about your usual work routine but then one day that heavy load you were carrying fell right at your foot.

If you weren’t wearing steel-toed work shoes, then you’re in for excruciating pain.

Falling objects aren’t the only cause of squashed feet, operating machines and vehicles could also endanger you feet.

Simply avoiding contact with these risks is not enough. They are inevitable especially in industrial settings.

A pair of work boots with a protective steel toe cap can withstand the force of heavy objects.

So now your only worry when carrying heavy loads is where you put it!

Heavy duty safety boots to prevent punctures

In any construction or industrial site, sharp objects like nails, screws, tiles may be laying around. Stepping onto them can be severe if the right shoes are not worn.

Good housekeeping may help reduce such risks but wouldn’t you feel much safer if you’re 100% free of sharp risks?

When buying safety footwear, consider one that has heavy duty soles and with thick material exterior for better feet protection.

Not just any outsole, polyurethane (PU) profiled outsoles can also prevent traction and absorb impact.

Look for cowhide leather shoes as they are thicker and stronger compared to goatskin.

It’s no use wearing cool-looking shoes if you’re going to poke holes in them.

ESD safety shoes to prevent electrical hazards

Does your worksite use electricity? Of course it does!

Case in point, you’ll be within risk of electric shocks or static leading to potential sparks. How can a pair of shoes prevent such hazards you may ask?

It’s all in the leather which composes 75% of protective shoes.

If your environment has a high risk of electrical accidents, opt for cow leather shoes which are non-conductive.

On the other hand, build up of static could also lead to electric sparks. So if your work routine has a possibility of that, look for ESD or static dissipative shoes to prevent such risk.

Slip resistant work shoe to prevent falls

Now for the most overlooked but common accident.

Not only limited to construction or industrial workers, slips, trips and falls may also happen to nurses and cooks.

It may not seem as threatening as other workplace hazards but if taken lightly, you might just end up in the nearest ER.

Sure, good housekeeping and applying anti-slip floor tape could prevent these accidents. However, take that extra mile by wearing slip resistant work boots.

By wearing anti-slip footwear, the only fall you’ll be experience is the fall in down time.

EVA insoles work shoes to prevent feet fatigue

Working all day is super tiring, especially in a job where you’re constantly moving on hard flooring. Just imagining it seems exhausting!

Body muscles grow tired after long straining hours and may lead to musculoskeletal disorders.

You need something to support your posture. Those uncomfortable shoes aren’t doing anything to help either.

So you better make sure your safety footwear comes with a breathable lining. Sandwich mesh is wear-resistant and has a unique elastic function that can tolerate all your day to day activities.

Take note on the insoles as well. EVA insoles are your best bet for better blood circulation and better foot health.

Heat resistant safety shoes to prevent burns and chemicals

Electrical hazards can cause fires and if you’re not wearing heat resistant shoes, well let’s just say you won’t be jumping with joy.

Some worksites also deal with chemicals which can corrode shoes and seep to your skin. Nobody wants either of that!

So find a pair of workboots that can withstand temperatures and chemicals that your workplace may pose.

Don’t just rely on the outer material, soles should be able to sustain hydrocarbons and heat too.

Choose heat resistant HRO shoes which can withstand up to 300 °C and with Kevlar anti-fire material.

Need we say more? These shoes can practically blow those fires away!

Are employers required to provide safety shoes?

Your workers keep your business going. So you should prioritize their wellbeing and general health above all else.

Make sure each of them have protective footwear that fits their job description.

After all, happy workers leads to better productivity and rapport which will shine through your business.

All that’s left to do is purchase the ultimate safety boots your workers deserve.

Stuck deciding where? Search no further than here!

We’ve got shoes that are super strong yet surprisingly comfortable.

Buy Boxter Safety Shoes in bulk and get these amazing benefits!

Tested and Certified by Accredited Certification Bodies

Join Others to Become Our Next Customer

Contact Us now for Bulk Order Discount!

The post 6 Ways Safety Shoes Protect Workers appeared first on Safety Shoes Brand In Malaysia - BOXTER.