DOSH Malaysia has set several PPE approval rules and regulations for SIRIM safety shoes.

In Malaysia, it is compulsory that employees provide SIRIM approved PPE for all workers. This is because the Malaysian Government states so.

In general, the most commonly used PPE is protective footwear.  Hence, it is vital to SIRIM approved safety shoes before wearing them to work.

So, before you buy wholesale safety boots, here are some facts you need to know about DOSH SIRIM PPE approval in Malaysia.

What is the scope of DOSH approval?

The DOSH approval by the Director-General is applied for all PPE products.

Therefore, all safety shoe manufacturers in Malaysia must firstly certify their footwear before distribution.

Nonetheless, the SIRIM DOSH approval also applies to safety boots that are imported into Malaysia.

What are safety shoe regulations?

PPE including safety shoes must receive approval from the Director-General of DOSH Malaysia.

This regulation is stated in the Factory and Machinery Act 1967 and the Occupational Safety and Health Act 1994.

Therefore, there is no reason for employers to ignore this legislation stipulated by the Malaysian Government.

How to read a SIRIM label

SIRIM and DOSH gives a certification mark or SIRIM label to every protective gear tested and approved by them.

Once certified, suppliers can put this label on each safety shoe or PPE to signify its validity and safety.

When is the date for the enforcement of SIRIM safety shoes?

Certainly, all types of PPE must have a certification mark (SIRIM DOSH label) tested by SIRIM QAS and approved by the Department of Occupational Safety and Health Malaysia.

Therefore, employers should take note that the use of safety shoes SIRIM approved is extended until 1st June 2021.

How to get PPE SIRIM approval from DOSH?

Safety shoes suppliers in Malaysia must go through stringent testing under SIRIM to obtain approval from DOSH.

Only then, employers are able to purchase DOSH SIRIM safety footwear for their employees to wear to work.

For more information: Guidelines for Safety Shoes DOSH Approval in Malaysia

How long is the SIRIM safety shoes license validity?

Any type of protective gear including safety footwear has a product certification license validity of 1 year. 

After 1 year, the safety shoes brand in Malaysia must renew the SIRIM certificate of approval through a surveillance audit or by any other stated method.

Suggested read: The Leading DOSH SIRIM Safety Boots Supplier in Malaysia

Choose SIRIM Approved Boxter Shoes

Uncertified safety shoes are unsafe for your workers and your business.

All in all, now you are aware of the important notes about Malaysia SIRIM certification.

So, buy Boxter safety shoes approved by DOSH to replace your old and worn work shoes.

Buy Boxter Safety Shoes in bulk and get these amazing benefits!

Tested and Certified by Accredited Certification Bodies

Join Others to Become Our Next Customer

Contact Us now for Bulk Order Discount!

The post PPE Approval Guide to SIRIM Safety Shoes Malaysia appeared first on Safety Shoes Brand In Malaysia - BOXTER.

DOSH SIRIM safety shoes are a must for ALL workers

As stated by the Malaysian OSH regulations, it is a legal requirement that employers provide DOSH SIRIM certified safety shoes for their workers.

Here at Boxter Footwear, we specialize in indestructible DOSH SIRIM certified safety shoes to protect your workers and your business.

So, here is a complete guide to DOSH SIRIM boots to help you make the right choice in work boots.

How are Safety Boots Approved by DOSH SIRIM?

Basically, all personal protective equipment (PPE) must go through strict assessment from SIRIM QAS International before receiving approval from DOSH Malaysia.

Although it may seem like a simple process, the procedure to certify any PPE especially worker’s safety shoes is quite extensive.

Mainly because the quality and durability of safety shoes SIRIM approved is no small matter.

DOSH SIRIM Safety Shoes Features

As of 1st October 2019, every pair of safety work boots must have the SIRIM-DOSH label. 

This is one of the DOSH standards by Department of Safety and Health (DOSH) Malaysia initiatives to protect worker’s welfare at the workplace.

Thus, worker’s safety boots should be able to withstand several hazards that can potentially occur during work.

The Best DOSH Safety Shoes in Malaysia

Generally, it is crucial that all workers wear DOSH approved safety shoes in Malaysia.

Because SIRIM safety shoes not only prevent injuries, but they indirectly avoid employers from possible penalties, fines and legal issues.

However, it is a difficult decision to choose which pair of kesihatan approved safety shoe best suits workers.

Safety Boots Supplier

So now you know what exactly is DOSH SIRIM approved safety work shoes, you should consult the best safety shoes brand.

Why search further when you can trust Boxter with the top safety shoes fully certified by DOSH & SIRIM. 

Choose a DOSH SIRIM Safety Shoe Supplier

Employers should prioritize worker’s health and safety by providing JKKP certified safety shoes. 

Hence why Boxter provides a wide variety of safety certified work boots for many industries, for any type of work.

So if you’re looking for a DOSH-SIRIM certified safety shoe manufacturer, Boxter Footwear is your top choice!

Buy Boxter Safety Shoes in bulk and get these amazing benefits!

Tested and Certified by Accredited Certification Bodies

Join Others to Become Our Next Customer

Contact Us now for Bulk Order Discount!

The post The Complete Guide to DOSH SIRIM Safety Shoes appeared first on Safety Shoes Brand In Malaysia - BOXTER.

Not conducting a hazard assessment can cause serious problems for workers and your business. 

Especially workers who spend a lot of time on their feet. This includes construction, manufacturing, agriculture and other workers.

Generally, these workers face several problems such as sprains, injuries from sharp objects, crushed feet and slips, trips and falls.

Thus, it is important that employers conduct a hazard assessment of all the potential risks at the workplace to protect workers.

Is a hazard assessment for footwear important?

Yes. As stipulated by the Malaysian OSH regulations, worker’s safety and health should be the employer’s responsibility. 

In any worksite, one staple workwear are safety boots. However, a hazard assessment is necessary to pinpoint all the risks first.

Crush injury of the foot

Does your worksite have heavy materials and equipment? They are a hazard that can cause crushed feet.

Although you can warn workers to be more cautious around the area, one definite solution is to gear workers with steel toe boots.

Once workers wear steel toe safety shoes, they can work comfortably and safely throughout the day.

Sharp injuries and punctures 

At any worksite, there is a possibility of misplaced or scattered sharp objects such as nails, screws or sharp sided material.

Hence, before long, workers might face injuries and wounds that can compromise their work.

Even if workers conduct frequent housekeeping, there can still be a possibility of feet injury.

So, for full safety, workers must wear puncture-resistant safety boots that have heavy duty soles and a thick exterior. 

Hazard assessment of electrical hazards at the workplace

Electric shocks or static are a common workplace hazard (hazard di tempat kerja), particularly with machinery and industrial tools.

Therefore, employers must identify which areas have these hazards. Then, equip the staff working in these areas with electrical hazard safety shoes.

To resolve this, buy ESD safety shoes made from genuine cow leather material that is non-conductive to offer better feet protection. 

Causes of slips, trips and falls

Slips, trips and falls commonly happen due to slippery surfaces, smooth flooring and spilled liquid.

These accidents may not be as fatal as other hazards, but it is the most common. Hence, a hazard assessment is crucial to identify where these accidents can happen.

Afterward, employers must prep workers at these accident-prone areas with anti-slip or slip-resistant safety shoes.

Workplace burn injuries hazard assessment

Excessive heat can occur from electrical equipment, chemicals or combustion depending on the industry.

With that said, severe burns can seriously injure workers or worse, cause fatality. So, conduct a hazard assessment to determine which areas have these risks.

Once an assessment is done, place safety precautions so workers are more aware in these areas.

Moreover, employers must provide workers in these risky areas with heat resistant shoes that can withstand temperatures and corrosive chemicals.

Suggested read: Indestructible Features of Boxter Safety Shoes

Conduct a hazard assessment for full protection

Keep workers and your business safe with a hazard assessment.

Once you’ve identified each hazard with a safety footwear risk assessment, gear each worker with the right safety hazard (hazard keselematan) shoes.

This will ensure that your workers are not only safe but work more productively as well.

Nonetheless, you should conduct shoes inspection checklist before buying the best safety shoes from a top grade safety shoes supplier.

Boxter has a full range of high performance safety shoes that fulfils your safety shoes inspection checklist.

Buy Boxter Safety Shoes in bulk and get these amazing benefits!

Tested and Certified by Accredited Certification Bodies

Join Others to Become Our Next Customer

Contact Us now for Bulk Order Discount!

The post Safety Shoes 101: How do you perform a hazard assessment? appeared first on Safety Shoes Brand In Malaysia - BOXTER.

Buy from a certified safety shoes supplier for DOSH SIRIM safety shoes.

With that said, always buy from a safety shoes supplier instead of shopping for safety shoes at an uncertified online store.

However, some employers have a hard time looking for affordable yet comfortable safety shoes for their workers. Especially for those working in heavy industries.

Hence, it is highly recommended to purchase high quality safety shoes from a DOSH certified safety shoes brand in Malaysia. 

Here’s how you can decide on the best safety shoes supplier that ticks all your boxes. 

Guide to Choose a Safety Boots Supplier in Malaysia

DOSH approved PPE is crucial for any workplace, particularly safety boots. So, investing in JKKP certified safety shoes from safety boots suppliers can protect you in the long run.

Quality of Safety Shoes

All safety shoes must be tested by a government accredited body which in Malaysia is SIRIM QAS International.

Thus, employers should ensure workers shoes are made by a work shoes supplier that are SIRIM certified.

Moreover, it is important to note that DOSH SIRIM safety shoes have met the strict requirements so workers are safe from potential hazards.

This mainly includes ESD safety shoes, heat resistant safety boots, waterproof safety boots and puncture resistant shoes.

Affordable Pricing by Safety Shoes Brand

Although quality is a top priority, employers are not all that convinced unless the working shoes supplier offers a bulk order of safety shoes within their budget.

It is the first question we usually get before every purchase and understandably so.

However, it is best to remember that the price reflects the quality of a lightweight safety shoe.

More often than most, a RM50 safety shoe will never as durable as a RM150 safety boots.

So, rather than buying cheap safety shoes, consider the cost-efficiency of a quality pair of safety shoes. They require less repairs and replacement in a short time.

In future, you will actually save more when you buy cost for value from a industrial footwear supplier.

Supplier Location

There are many international safety shoes suppliers such as Caterpillar, Black Hammer and Safety Jogger safety shoes.

Although they may be well-known, choosing a non-local safety boots manufacturer has its disadvantages.

First, it is challenging to inquire for customer service due to the distance and different time zones. Thus, it is much easier to choose a safety boots manufacturer near you if you want quick delivery, replacements or service.

In addition, it is always a good idea to support trusted local businesses that make quality safety shoes until they are known globally.

Suggested read: Guidelines for Safety Shoes DOSH Approval in Malaysia  

Great Customer Service

A business is nothing without its customers. However, not every business values its customers. Some are friendly to convince buyers but ignore them after the purchase is done.

Although you may feel customer service is the least of your worries, you may face issues that only the manufacturer’s customer service can solve.

Hence, it is recommended to read previous customer’s reviews on the safety boots supplier’s customer service and how they handle different situations.

In the end, it will definitely benefit you to find a reliable safety shoes supplier even after you have made a purchase with them.

Suggested read: The Most Lightweight Safety Shoes in 2020

The Best Safety Shoes Supplier in Malaysia

Choose the best safety boots supplier in Malaysia to protect your workers

All in all, choosing the best pair of safety shoes for your workers is just as important as choosing the best safety shoes brand.

Your search ends here! Boxter Footwear has the experience and skills as an ultra light safety shoes supplier fully certified by DOSH & SIRIM with the best safety shoes materials.

We have provided workers with our high quality lightweight safety shoes from various industries.

Buy Boxter Safety Shoes in bulk and get these amazing benefits!

Tested and Certified by Accredited Certification Bodies

Join Others to Become Our Next Customer

Contact Us now for Bulk Order Discount!

The post How to Choose the Best Safety Shoes Supplier in Malaysia appeared first on Safety Shoes Brand In Malaysia - BOXTER.

DOSH Malaysia has set several rules and regulations for their DOSH approval that relate to workplace safety.

In Malaysia, it is a legal requirement that all workers wear PPE with DOSH approval.

This is in line with the Factories and Machinery Act 1967, Occupational Health and Safety Act 1994.

Generally, safety shoes is one of the top most important PPE that needs DOSH-SIRIM certification. Regardless for construction, industrial, government or service sectors.

Although DOSH approves the use of a PPE, SIRIM QAS International is the organization that analyses the performance for safety footwear in Malaysia.

Hence, every pair of safety workboots must have a SIRIM-DOSH label as of 1st October 2019.

How does DOSH Malaysia approve Safety Shoes?

Basically, the Department of Safety and Health (DOSH) Malaysia states that safety boots must be able to withstand several hazards at the workplace.

Hence why it is crucial to wear DOSH safety shoes in Malaysia. Because it is not only to prevent injuries, but to avoid penalties, fines and legal issues.

However, the procedure can be quite extensive due to how vital the quality of safety shoes are.

That’s why Boxter shoes are fully approved by DOSH SIRIM Malaysia. So we’ll uncover the process of applying the approval for DOSH in Malaysia.

Suggested read: Complete Features of DOSH SIRIM Certified Safety Shoes

Procedure for DOSH approval application

Whether the safety shoes are imported or locally made in Malaysia, they are within the scope of being DOSH-approved safety shoes.

Nonetheless, before you even consider applying for a DOSH-SIRIM label, you must first ensure that your safety shoes can protect against:

1. corrosive materials
2. electrical hazards
3. high static electricity
4. heavy rolling objects
5. penetrating objects
6. molten metal
7. slippery flooring

Then, once you are certain the safety footwear applies to said requirements, you can start registering for the DOSH-SIRIM approval.

Flowchart to Apply for DOSH Approval

1. DOSH Approval Application Form

1. Download the form and checklist for safety shoes approval application.
2. Ensure all applications have the official company letter head
3. Then, address the application to:
   Approval and Hazard Control Monitoring Unit,
   Industrial Hygiene & Ergonomics Division,
   Department of Occupational Safety and Health (DOSH),
   Level 4, Block D4, Complex D,
   Federal Government Administrative Centre,
   62530 Putrajaya.
   Tel : 03-8886 5334
   Fax: 03-8890 1315
4. Send the application with the following documents:
   • Official Company Letter Head Application
   • Original catalogue/brochure and manual on use of safety shoes
   • Full type test report from SIRIM QAS International Sdn Bhd
   • Product Certification License from SIRIM QAS International Sdn Bhd
   • Appointment letter as authorized distributor/supplier from original manufacturer
5. Different types of PPE must have a separate application form with the required information below:
   • Numbers
   • Type of PPE
   • Brand
   • Model
   • Manufacturer
   • Standard
   • Type of protection

2. Testing of Safety Shoes

Generally, safety shoes testing can be carried out in:

• • Testing laboratory at SIRIM QAS International
  • Testing laboratory at Manufacturing Factory
  • Third party testing laboratory
  • Testing laboratory accredited to ISO / IEC 17025

3. Verification of DOSH Approval Application

1. First, DOSH will verify all the provided documents after receiving the completed application. Afterwards, the confirmed decision will be issued within 30 working days of sent applications.
2. Safety shoes DOSH approval is based on full type test report results supervised by SIRIM QAS International Sdn Bhd witnessed by DOSH.
3. The period of approval is 5 years based on the validity of the KPD  approval letter issued by DOSH.
4. However, supplementary license is not allowed. Hence, each applicant must have their own full type test report and product certification license.

4. After obtaining DOSH Approval

1. SIRIM QAS International will conduct surveillance audits from time to time. Therefore, the safety shoes approval will be terminated if any issues arise during the audit.
2. The applicant are fully responsible for the following:
   • Notify DOSH of any changes in address, telephone number, fax number or status as a legitimate supplier or distributor.
   • Provide training and/or assistance to consumers regarding the selection, use and maintenance of safety shoes.
   • Comply with the set instructions issued by DOSH. If information is incorrect, DOSH may withdraw the approval.
   • Present the label or logo of approval issued by SIRIM QAS International Sdn Bhd.

Have further questions about the DOSH application? Then take a look at DOSH SIRIM PPE Approval FAQ to know more.

Suggested read: Foot Injuries and How Safety Shoes Prevent Them

Choose Safety Shoes with DOSH approval

Don’t risk your worker’s safety with uncertified safety shoes.

In conclusion, now you know the process to apply for DOSH kesihatan approved safety shoes and how important it is for any safety shoe wearer.

Thus, replace your old and worn work shoes with Boxter safety shoes fully approved by DOSH-SIRIM. So, you will never have to worry about foot-related injuries or penalties again!

Buy Boxter Safety Shoes in bulk and get these amazing benefits!

Tested and Certified by Accredited Certification Bodies

Join Others to Become Our Next Customer

Contact Us now for Bulk Order Discount!

The post DOSH Approval Guidelines for Safety Shoes in Malaysia appeared first on Safety Shoes Brand In Malaysia - BOXTER.

It is a legal requirement that employers provide workers with DOSH SIRIM safety boots.

That is why you should only choose from a local top DOSH SIRIM safety boots supplier – Boxter Global Sdn Bhd.

Why is DOSH SIRIM so important? Because for industrial settings, you need certified safety gear so you’re protected from hazards.

So as a leading safety shoes brand in Malaysia, it is our duty to let you know of the importance of high quality safety shoes.

What are DOSH / JKKP standards?

The Department of Occupational Safety and Health has long since made it a requirement for workers to wear DOSH approved safety shoes.

Getting approval from DOSH Malaysia is not an easy task. To date, there are many requirements that must be met before safety boots are approved for work.

See DOSH SIRIM Approval FAQs

SIRIM Standards for Safety Shoes

SIRIM provides the service of quality management system, product certification and testing. They specialize in product compliance that meets the required standards, regulatory equirements and specifications.

Every type of safety shoes must go through an initial test along with a re-evaluation test every five years to meet compliance. Moreover, a surveillance test is also conducted yearly for the same reason.

The standards for safety footwear is labeled as MS ISO 20345 which tests several important parameters.

Refer Relevant Standard Using Testing Facilities in SIRIM QAS International

Impact Resistant DOSH SIRIM Safety Boots

Working around heavy equipment is hazardous in itself. Although safety precautions are in place, there is still a possibility of falling objects.

Along with a sturdy hard hat, workers need safety shoes that can withstand heavy impacts. 

Hence, you will need the best industrial safety shoes with a protective steel toe cap specially made by Boxter.

Abrasion Resistant DOSH SIRIM Safety Boots

Made from the finest safety shoes materials sourced locally and internationally, abrasion is no match for Boxter safety shoes SIRIM approved.

Until now, workers need to replace their work boots often due to the poor quality. So, Boxter solves this solution by using SIRIM certified materials that can handle the toughest conditions within a long time.

Suggested read: Foot Injuries and How Safety Shoes Prevent Them

Insulation of DOSH SIRIM Safety Shoe

After hours on end working in high temperature surroundings, your feet may start to feel uncomfortably warm.

Thus, workers exposed to heat must wear heat-safe work shoes to go by their day worry-free.

But not just any heat-safe shoes, choose Boxter’s JKKP certified safety shoes that can endure high temperatures longer.

Corrosion Resistant DOSH SIRIM Safety Boots

Most workers are exposed to different kinds of chemicals which can damage a shoe’s outer material. Eventually, this will injure the worker’s feet.

This is the main reason Boxter has created the best lightweight safety shoes that stay intact even in corrosive environments.

Puncture Resistant DOSH SIRIM Safety Boots

Heavy duty soles provide a thick exterior that can protect the feet from stepping on sharp objects. This applies especially for those working in construction where tools and items lay around.

Therefore, Boxter uses polyurethane (PU) as safety shoes outsoles. These SIRIM safety shoes are highly durable to withstand punctures and absorb impact as well.

Suggested read: Indestructible Features of Boxter Safety Shoes

DOSH SIRIM Safety Boots for Ultimate Safety

The main reason why DOSH SIRIM safety shoes are crucial is because safety is always a priority.

Before you make the decision to buy your worker’s or yourself safety shoes, consider consulting the best safety shoes brand you can rely on.

Trust Boxter to provide you with the top safety shoes fully certified by SIRIM & DOSH standards. We’ve been supplying workers from various industries with our safety shoes for years!

Now all you need to do now is browse the different pairs of comfortable safety shoes that fit your work and your feet perfectly.

Buy Boxter Safety Shoes in bulk and get these amazing benefits!

Tested and Certified by Accredited Certification Bodies

Join Others to Become Our Next Customer

Contact Us now for Bulk Order Discount!

The post DOSH SIRIM Safety Boots Leading Supplier in Malaysia appeared first on Safety Shoes Brand In Malaysia - BOXTER.

How Safety Shoes Protect Workers from Workplace Foot Injury

At any worksite, one of the most essential gear is workers safety shoes to prevent workplace foot injury.

However, workplace foot injury still happens at an alarming rate. Although there are many factors, one that can be resolved easily is if employers make the right choice in safety shoes.

As an employer, it is the law to follow the DOSH requirements which states that all workers must be provided with DOSH SIRIM safety shoes.

Hence, to be safe, here’s a list of the common mistakes employers make when buying safety boots so workplace foot injury can be avoided.

Guide to Buy Safety Shoes for Workers

1. Should an employer provide safety boots?

Some employers take their workers’ safety for granted. Once worker’s PPE is worn and torn, they think it is not their priority to replace them.

Nonetheless, this is partly because employers are not aware of the legal requirement of worker’s safety shoes.

We’re here to tell you that you should provide all workers with certified safety shoes.

Suggested read: 6 Ways Safety Shoes Protect Workers

2. Who is under the risk of workplace foot injury?

Every operation and task has hazards even if several precautions are in place.

Especially for workers in the manufacturing, construction and logistics industry where there are many heavy and sharp objects.

Hence, employers must know which areas that can lead to workplace foot injury or fatalities.

Then, provide workers with suitable pairs of lightweight safety shoes that fit their job scope.

3. What can lead to workplace foot injury?

Most of the time, employers feel that putting up hazard signs and practising safety precautions are enough.

Although important, employers must also prepare for when those safety measures are not enough.

Therefore, by knowing the different types of dangers at the worksite such as heavy objects falling and rolling on feet, fires and electric hazards, they can be prevented by providing the right pair of comfortable safety shoes.

4. How serious is workplace foot injury?

Although the foot area is not a major part of the body, we wouldn’t be able to walk without them.

Despite that, some employers are unaware of how dangerous workplace foot injury is.

For example, heavy objects falling on a foot can take weeks to heal. Also, sharp objects puncturing a shoe can severely harm a worker.

This is because feet have very little soft tissue as protection. Hence the need to wear the right pair of indestructible safety shoes is crucial for daily operations.

Suggested read: 10 Types of Safety Shoes that Protect your Workers

5. Cost over Safety of Safety Shoes

As the leading safety shoes manufacturer and supplier in Malaysia, we are often approached with the question of safety shoe prices.

Even though the cost is important to consider, saving costs by buying cheap alternatives will not save lives.

That is why you will always find a cheaper option but the best pair of safety shoes can save you the cost of sending your workers to the hospital.

Protect workers with DOSH SIRIM safety shoes 

Your workers are who keep your business moving. So prioritizing their health and wellbeing shouldn’t be an afterthought. 

What employers should do is to provide DOSH SIRIM certified safety shoes that has all the features a working environment needs.

After all, healthy workers leads to better productivity and efficiency which will benefit your business greatly.

Stuck deciding the top safety shoes supplier? Search no further!

We’ve got shoes that are super strong yet surprisingly comfortable.

Buy Boxter Safety Shoes in bulk and get these amazing benefits!

Tested and Certified by Accredited Certification Bodies

Join Others to Become Our Next Customer

Contact Us now for Bulk Order Discount!

The post Common Mistakes to Avoid When Buying Workers Safety Shoes appeared first on Safety Shoes Brand In Malaysia - BOXTER.

Employers must always ensure their worker’s put their best foot forward.

The Malaysian OSH regulations require all employers to provide DOSH SIRIM certified safety shoes.

Failure to do so may lead to legal issues that can detriment your company.

So here are the features of DOSH SIRIM safety shoes that best suit your workers on a daily basis.

What are the DOSH Safety Shoe Requirements?

The Department of Safety and Health (DOSH) states that safety boots must withstand several hazards.

The Standard and Industrial Research Institute of Malaysia (SIRIM) Berhad, they are responsible to certify DOSH-approved shoes.

DOSH SIRIM Steel Toe Boots for Impact Resistance

A common cause of injury especially in heavy industries is heavy impact.

Hence, provide workers in such conditions with safety shoes with a protective steel toe cap.

Compression Resistance

Some working conditions crush the feet due to heavy objects rolling.

So without a steel toe cap that can withstand pressure, you can say goodbye to your toes and your job.

Flexing Resistance of Safety Shoes

It is important that the material of the safety shoe is of good quality leather or fabric.

That’s why the material should be able to flex without tear within long periods of time under exposure.

DOSH SIRIM Safety Boots with Abrasion Resistance

Another feature of the safety shoe material is its resistance to abrasion. Because workers are more secure wearing shoes that won’t rupture easily.

Hence, DOSH approved safety shoes have high abrasion resistance to prevent material or volume loss.

Thermal Insulation of Work Boots

Worksites such as welding, construction and machine operations are prone to high temperatures which needs kesihatan approved safety shoe.

Therefore, without a pair of good insulators of heat safety boots, the heat will compromise workers’ feet.

DOSH SIRIM Safety Shoes with Corrosion Resistance

In some instances, workers are exposed to acids, alkalies, salts and corrosive gases.

Thus, prep these workers with corrosion resistance safety shoes to withstand such chemicals.

Penetration Resistance of DOSH SIRIM Safety Boots

When buying workers’ safety footwear, consider heavy duty soles and a thick exterior for better feet protection.

Polyurethane (PU) profiled outsoles are the best type to prevent traction and absorb impact.

DOSH SIRIM ESD Shoes

Electric shocks can severely harm your workers. So, wear electrical resistance shoes since the feet area is one of the most exposed to electricity.

However, if there is a risk of electrical accidents, opt for cow leather shoes which are non-conductive.

Shock Absorption of Work Shoes

Cow leather shoes are non-conductive. This helps in mitigating the shock caused by excessive kinetic energy from the feet.

Moreover, energy absorbing shoes can safely contain the kinetic energy absorbed through the feet. This prevents it from spreading throughout the body.

Watertight Shoes

Any pair of good quality shoes should be leakproof. Especially for industrial workers who depend on their safety shoes for their efficiency.

That’s why DOSH-SIRIM inspects materials supporting the safety shoe so that they do not leak as much.

Safety Boots with Oil Resistance

Oils can seep into poor quality shoes and harm workers’ feet.

For such workers, employers must prepare oil-resistant safety shoes for comfortable work.

Choose wisely, Choose DOSH SIRIM certified.

Prioritizing workers’ well being and general health is a top responsibility of employers.

Take note on the different aspects of the worksite to fit with the choice of safety shoes. It is quite easy since there is a wide variety of them in the market.

So, once you’ve done the hazard assessment, contact a DOSH-SIRIM certified safety shoe manufacturer to order in bulk.

Search no further than Boxter!

Buy Boxter Safety Shoes in bulk and get these amazing benefits!

Tested and Certified by Accredited Certification Bodies

Join Others to Become Our Next Customer

Contact Us now for Bulk Order Discount!

The post DOSH SIRIM Certified Safety Shoes Features appeared first on Safety Shoes Brand In Malaysia - BOXTER.

How DOSH SIRIM Certified Safety Shoes Protect Workers

Employers are responsible to provide and insist their workers to wear safety shoes on the job.

There is no question why personal protective equipment (PPE) is so important, especially safety shoes.

The Malaysian OSH regulations has a strict ruling on work safety.

In any worksite, one staple workwear are safety boots.

Prevention is better than cure. Fatalities, disabilities and lost wages can be a pain to ‘cure’.

Feet injury is easily prevented by following the set safety boots standards of protective work boots.

Here’s a list of how DOSH SIRIM Certified safety footwear protect workers on the job.

Steel toe safety shoes to prevent crushed feet

Imagine for a second. Going about your usual work routine but then one day that heavy load you were carrying fell right at your foot.

If you weren’t wearing steel-toed work shoes, then you’re in for excruciating pain.

Falling objects aren’t the only cause of squashed feet, operating machines and vehicles could also endanger you feet.

Simply avoiding contact with these risks is not enough. They are inevitable especially in industrial settings.

A pair of work boots with a protective steel toe cap can withstand the force of heavy objects.

So now your only worry when carrying heavy loads is where you put it!

Heavy duty safety boots to prevent punctures

In any construction or industrial site, sharp objects like nails, screws, tiles may be laying around. Stepping onto them can be severe if the right shoes are not worn.

Good housekeeping may help reduce such risks but wouldn’t you feel much safer if you’re 100% free of sharp risks?

When buying safety footwear, consider one that has heavy duty soles and with thick material exterior for better feet protection.

Not just any outsole, polyurethane (PU) profiled outsoles can also prevent traction and absorb impact.

Look for cowhide leather shoes as they are thicker and stronger compared to goatskin.

It’s no use wearing cool-looking shoes if you’re going to poke holes in them.

ESD safety shoes to prevent electrical hazards

Does your worksite use electricity? Of course it does!

Case in point, you’ll be within risk of electric shocks or static leading to potential sparks. How can a pair of shoes prevent such hazards you may ask?

It’s all in the leather which composes 75% of protective shoes.

If your environment has a high risk of electrical accidents, opt for cow leather shoes which are non-conductive.

On the other hand, build up of static could also lead to electric sparks. So if your work routine has a possibility of that, look for ESD or static dissipative shoes to prevent such risk.

Slip resistant work shoe to prevent falls

Now for the most overlooked but common accident.

Not only limited to construction or industrial workers, slips, trips and falls may also happen to nurses and cooks.

It may not seem as threatening as other workplace hazards but if taken lightly, you might just end up in the nearest ER.

Sure, good housekeeping and applying anti-slip floor tape could prevent these accidents. However, take that extra mile by wearing slip resistant work boots.

By wearing anti-slip footwear, the only fall you’ll be experience is the fall in down time.

EVA insoles work shoes to prevent feet fatigue

Working all day is super tiring, especially in a job where you’re constantly moving on hard flooring. Just imagining it seems exhausting!

Body muscles grow tired after long straining hours and may lead to musculoskeletal disorders.

You need something to support your posture. Those uncomfortable shoes aren’t doing anything to help either.

So you better make sure your safety footwear comes with a breathable lining. Sandwich mesh is wear-resistant and has a unique elastic function that can tolerate all your day to day activities.

Take note on the insoles as well. EVA insoles are your best bet for better blood circulation and better foot health.

Heat resistant safety shoes to prevent burns and chemicals

Electrical hazards can cause fires and if you’re not wearing heat resistant shoes, well let’s just say you won’t be jumping with joy.

Some worksites also deal with chemicals which can corrode shoes and seep to your skin. Nobody wants either of that!

So find a pair of workboots that can withstand temperatures and chemicals that your workplace may pose.

Don’t just rely on the outer material, soles should be able to sustain hydrocarbons and heat too.

Choose heat resistant HRO shoes which can withstand up to 300 °C and with Kevlar anti-fire material.

Need we say more? These shoes can practically blow those fires away!

Are employers required to provide safety shoes?

Your workers keep your business going. So you should prioritize their wellbeing and general health above all else.

Make sure each of them have protective footwear that fits their job description.

After all, happy workers leads to better productivity and rapport which will shine through your business.

All that’s left to do is purchase the ultimate safety boots your workers deserve.

Stuck deciding where? Search no further than here!

We’ve got shoes that are super strong yet surprisingly comfortable.

Buy Boxter Safety Shoes in bulk and get these amazing benefits!

Tested and Certified by Accredited Certification Bodies

Join Others to Become Our Next Customer

Contact Us now for Bulk Order Discount!

The post 6 Ways Safety Shoes Protect Workers appeared first on Safety Shoes Brand In Malaysia - BOXTER.